Livestock feed pellet cooling equipment Pellet cooler machine
Livestock feed pellet cooling equipment Pellet cooler machine
I. General Introduction to Counterflow Pellet Cooler
The counterflow pellet cooler is applied for efficient cooling of hot and moist pelleted products with good flowing capabilities. Typical applications are for cooling of feed pellets and wood pellets. It can reduce the temperature of pellets from 80~90℃to about 3~5℃ above ambient temperature. And the pellet moisture content is reduced from 17%~18% to 12%~13%. The advantages in energy efficiency, easy operation, great cooling result and lower investment cost have made the counterflow pellets cooler the preferred choice for most users of feed and wood pellets plant.
The counterflow pellet cooler is applied for efficient cooling of hot and moist pelleted products with good flowing capabilities. Typical applications are for cooling of feed pellets and wood pellets. It can reduce the temperature of pellets from 80~90℃to about 3~5℃ above ambient temperature. And the pellet moisture content is reduced from 17%~18% to 12%~13%. The advantages in energy efficiency, easy operation, great cooling result and lower investment cost have made the counterflow pellets cooler the preferred choice for most users of feed and wood pellets plant.
II. Product features:
1.The counterflow cooler can be widely used for the cooling of all kinds of feed pellets in feed industry.
2. Simple structure, stable and gentle in opearation, low noise.
3. Easy to operate and maintain, convenient to install and adjust with high degree of automation.
4. Slide valve reciprocating discharging structure is adopted to ensure the smooth and uniform dischaging and effectively avoid the blocking of the materials.
5. Excellent cooling effect. The pellets can be fully cooled with higher uniformity and lower rate of crushing. The cooled pellets is 3—5℃ lower than room temperature.6. Smaller occupation of land and lower energy consumption.
III. Technical parameter of counterflow cooler
model
|
SKLN1
|
SKLN14X14
|
SKLN17X17
|
SKLN19X19
|
SKLN22X22
|
SKLN24X24
|
power（KW)
|
0.75
|
0.75
|
1.5
|
1.5
|
2.2
|
2.2
|
capacity（t/h）
|
1-2
|
2-5
|
3-8
|
4-10
|
8-15
|
10-20
|
Cooling time
|
Less than 6-10min
| |||||
Pellets temperature after cooling(℃)
|
Lower than room temperature 3-5℃
| |||||
size（LxWxH）(mm)
|
1600x1300x2200
|
2200x1600x2400
|
2580x1900x2750
|
3000x2200x3100
|
3360x2550x3300
|
3670x2800x3500
|
Weight(kg)
|
700
|
1230
|
1650
|
1860
|
2250
|
2430
|
IV. countercurrent/counterflow pellet cooler
How to Choose a Pellet Cooler for Your Pellet Plant?
The counterflow pellet cooler material discharging device adopts slide valve reciprocating type, it is suitable for pellet materials. Some coolers are with shutter type discharge mechanisms, which are adopting hydraulically powered discharging mechanism. These coolers are suitable for puffed and expanded materials.
How to Choose a Pellet Cooler for Your Pellet Plant?
The counterflow pellet cooler material discharging device adopts slide valve reciprocating type, it is suitable for pellet materials. Some coolers are with shutter type discharge mechanisms, which are adopting hydraulically powered discharging mechanism. These coolers are suitable for puffed and expanded materials.
V. What Should be Noticed When Operate the Counterflow Pellet Cooler?
1. Start the air-lock device and draught fan before the cooler starting to work.
2. Adjust the level indicator position according to the yield requirement. When the yield is high, install the level indicator at top position; on the contrary, install it below.
3. When the cooler stops working, expel the material in the cooler through operating the hand switch.
4. Don’t open the observation door when the cooler runs.
1. Start the air-lock device and draught fan before the cooler starting to work.
2. Adjust the level indicator position according to the yield requirement. When the yield is high, install the level indicator at top position; on the contrary, install it below.
3. When the cooler stops working, expel the material in the cooler through operating the hand switch.
4. Don’t open the observation door when the cooler runs.
VI. Application of the counterflow cooler
Counterflow cooler generally uses together with airlock, fan and cyclone.
It is an very important component in feed pellet production line, which is used to cool the temperature of the pellets down when making out the pellets in order to make it easier to store and transport.
Customer visit:
Contact us and tell us the following questions:
1. What kinds of materials do you want to cool off?
2. What is the size of the materials you want to cool off?
3. What is the temperature of the materials?
4. What is the water content of the materials do you want to cool off?
5. What is the final water content do you want for?
6. What capacity do you want for an hour?
Welcome to visit our website http://www.shpelletmill.com
For more information, pls contact catherine"at"sdshuanghe.com.
Shandong Double Crane Machinery Manufacture Co., Ltd. -----MANUFACTURER AND TRADER
Factory Address: High and New Industrial Park, Leling, Dezhou, Shandong
Catherine Ji
Mobile : +86-180 0531 1413 wechat: catherineji520
Skype : leia_ji QQ: 545187985 whatsapp:+86-18005311413
评论
发表评论