wood sawdust ram type briquette pellet making machine for sell capacity 1t/h

wood sawdust ram type briquette pellet making machine for sell capacity 1t/h


Working video of wood briquette machine




Product Description


♣ Ram-type Wood Briquette Making Machine not only can produce wood briquette,but also can produce wood pellet 8 or 10mm, and has advantage of unique design, easy operation, low consumption but high efficiency,because the wearing parts (Die) cost very low,so production cost very low.

♣The Raw Materials of Ram-type Wood Briquette Making Machine :

Crop stalks (including cornstalks cotton stalks ),grain shell(rice husk ) ,peanut shell and stalks, cotton stalks, sawdust,branch,bark ,bamboo powder, furfural residue(could be mixed used), Wood scraps, Forest harvesting slash, household refuse,scraps produced by paper making factory, all of these  could be smashed and briquetting.

♣   Ram-type Wood Briquette Making Machine Main Technical Parameters:

Ram Type Wood Briquette Machine
Main PowerMain Power 45kw,Total 60.35KW
Frequency Conversion Screw Conveyor1.5kw*2pcs
Sawdust Distributor0.25kw(Single-phase)
Left and Right feeding conveyor5.5kw*2pcs
Oil Pump 1.1kw
Electric Control Cabinet1 pcs
Production Capacity0.8-1.5T/h
Final Briquette or Wood Pellet Diameter8,10,22,30,40,50,60,70,80,85mm
Density of Briquette or Wood Pellet1-1.3g/CM3
Feeding Raw Materials SizeLess than or equal to 30mm
Raw Materials Moisture Content10-20%
Density of Briquette or Wood Pellet1-1.3g/CM3
Briquette Moisture ContentLess than or equal to 12%
Machine Size(L*W*H)3.4*2*1.8M
Machine WeightTotal weight 8Ton
Wearing Parts Die Life100-400Hour,Low Price

♣ Working Priciple of  Ram-type Wood Briquette Making Machine:

1.The machine get  reciprocating motion by pulley driven by eccentric wheel, and then the feeder machine will start to feeding. 
2.Then the raw material go through distributor to get into the feeding box on the briquetting machine;
3.The next step is from feeding box to molding machine by the appending machine from two sides . 
 Under the pressure caused by punch and molding die ,the raw material become heating up and softened ,and the volume become smaller. Then the raw material get solid and being extruded by molding die with reducing taper due to repeated impact . 
4.Pellet shaping process is effected by pressure and temperature ,so the operation principle is punch principle,the machine carry punch 280 times /min when it works normally. The pressure will up to 300T and the temperature is 150-200°C, so the equipment could be used widely for so many  kinds of  raw material and enjoying a excellent forming density.  5.In addition ,all parts of the equipment  lubricated forced by the Oil pump lubrication system to ensure the equipments enjoy a longer service time.


FAQ

> Frequently Asked Question:
1. What is your raw material for making wood pellet or wood briquette?
    Reply: Dryed Sawdust or shaving.
2. What is the size of your raw material? Especially the max feeding diameter (mm)?
    Reply:Size can be 3-30mm.
3. What is the moisture content of your raw material?
    Reply:Moisure about 15%,must less 20%.
4. What is the capcity do you need (kg/h)?
    Reply:Our company can supply equipment or production line capacity from 0.1-20T/H
5. What is the final pellet size(length and diameter) do you need (mm)?
    Reply:Wood Pellet diameter general 8mm, wood briquette diameter 8,10,22,30,40,50,60,70,80,85mm,
    length can control by adjust the pellet cutter.

评论

此博客中的热门博文

poultry feed grinder machine

factory direct supply ring die goat feed pellet making machine

Livestock feed pellet cooling equipment Pellet cooler machine